1. Open the Ethernet configuration software
2. Plug the computer and equipment into the same switch or router with a network cable (computer connection wifi can also be used)
Search the equipment "select target equipment" to confirm that "select dynamic IP" select TCP Client "fill in parameters" download parameters
参数:TCP Client 透传 ems.jydtu.com 60001
3、弹出配置成功即完成
4、新版软件可以使用一键云端功能直接配置
Search the equipment to "select the target equipment" to confirm that the "selected" button on the cloud
5. If the device is not online after configuration, contact the gateway to ask if the local network has any restrictions on connection to the external network. You need to activate authorized ip and use authorized ip to access the Internet.
Search the equipment "check the target device" to confirm that "configure static IP" is selected and select TCP Client "fill in parameters" download parameters.
6. Parameters: TCP Client transparent transmission ems.jydtu.com 60001
7. After the cloud platform app scans the QR code to add the device, the device controls the abnormal delay response. Delete and re-add it on the cloud platform configuration page.
8. After adding, the question still checks whether there are cameras and other large network devices under the same-level network, which takes up more data and causes the network of the device to be blocked. Add one-level routing under the same-level network and configure the device under the new route.