Application of Juying Internet of things equipment in intelligent security

The core of intelligent security is intelligent security system, which mainly includes access control, alarm and monitoring.

Security is a major application market of the Internet of things. Traditional security is highly dependent on personnel and very labor-intensive, while intelligent security can realize intelligent judgment through equipment. At present, the core of intelligent security is the intelligent security system, which transmits, stores, analyzes and processes the captured images. A complete intelligent security system mainly includes three parts: access control, alarm and monitoring. Video monitoring is mainly used in the industry.

1. Internet of things application in intelligent security

Because the amount of data collected is large enough and the time delay is low, at present, most of the video surveillance in the city adopts wired connection, while 4G and other wireless technologies are used for remote areas and mobile object monitoring.

Access control system: mainly based on inductive card, fingerprint, iris and face recognition. It is safe, convenient and efficient. It can link video capture, remote door opening, mobile phone position detection and trajectory analysis.

Monitoring system: mainly based on video, divided into police and civil markets. Through real-time video monitoring, use the camera to capture and record, store and analyze the video and pictures, and monitor in real time to ensure safety.

Alarm system: it mainly alarms through the alarm host. At the same time, some R & D manufacturers will place voice modules and network control modules in the alarm host to shorten the alarm response time.

2. Juying Internet of things intelligent security solution

Juying Internet of things provides a solution to realize point-to-point alarm detection in LAN only through hardware. Access control, video monitoring and alarm system are solved in one step. In the solution, audible and visual alarm is adopted for the alarm in the monitoring room:

Scheme introduction:

1. In general, there is a ready-made LAN of the enterprise, which communicates through the LAN in the current environment;

2. When there is no LAN environment, 485 communication can be adopted;

3. Two devices can be used in pairs. One device can be placed at the detection point and the other in the monitoring room;

4. The equipment control alarm is bidirectional interworking:

The monitoring room can monitor the access control and video monitoring status of the alarm point, and can also manually control the remote equipment. The alarm point can feed back the abnormal status to the monitoring center, and can also receive the control signal of the monitoring room;

3. Advantages of Juying solution

1. Low cost

LAN mode, without wiring; 485 mode, only one communication line is needed, and the wiring is simple and convenient;

2. Simple and practical

The monitoring center adopts the sound and light alarm mode, which has strong warning, and the alarm can be heard even if the personnel go out due to something;

3. Two way interworking, powerful

The monitoring point can not only receive the feedback alarm signal, but also manually control the remote equipment to switch the switch state

4. Wide application range

School bell control, factory access control, building monitoring and control, machine room monitoring and alarm and other occasions can be used.

Application products

1. Network port or 485 interface can be selected, and WiFi communication can be selected within WiFi coverage;

2. 4 / 8 / 10 / 16 / 32 channels and other multi-channel relay outputs are optional, which can be used to control access control, ringing, audible and visual alarm and other equipment;

3. 4 / 8 / 10 / 16 / 32 multi-channel switch alarm signals are optional, which can be used to collect switching value feedback signals such as access control, water immersion sensor and infrared radiation sensor;